2000AP Garden Lawn Spreader

The Lawn Shop Fertiliser Spreader - The 2000AP is the work horse for the small lawn. Fully assembled, the 2000AP goes from the box to the yard in seconds. With features found on much more expensive spreader like an all steel tubular frame, high-speed gearbox, and the EV-N-SPRED® 3-hole drop to ensure even spreading of all materials, this small spread has the feel of a Professional spreader. With it's 8"/20cm deep lug poly wheels, and it's 18kg rust-proof poly hopper, the 2000AP is a true performer.

18kg Rust-proof Poly Hopper

20cm Pneumatic Tyres

Adjustable Rate Control located high on the handle for easy use

EV-N-SPRED® 3-Hole Drop Shut-Off for even spreading

Fully Assembled - tighten 2 wing nuts and you are ready to go

For the granular fertiliser we sell on this web site, the setting should be on setting K to apply approx 30grams per square metre. The easy way to calibrate any spreader is to set the spreader on the desired setting, place some product in the hopper, place a sheet of polythene 1 metre square onto the driveway (not the lawn!) walk over the polythene, with the hopper gate open so the fertiliser is flowing and being spun on the spinning disc, make two passes if the polythene has not been evenly covered with fertiliser by only one pass of the spreader and then collect up the material on the polythene and weigh it making sure that you place a small plastic bag into the scales first. If you end up with either 20 or 30 grams per single square metre then you are doing it right!

If you are only getting 15 grams then fertilise the lawn in two passes, the second at right angles to the first so as to provide sufficient fertiliser and even coverage. The majority of lawn fertiliser scorch problems occur mainly through the effect of the Iron content of lawn fertilisers as it is often the iron that causes the scorch burn.

Make sure that you are not standing still on the lawn with the hopper gate open and also that you are actually moving BEFORE you open the hopper trigger so as to avoid a dump on the lawn. Make the first pass around the edges of the lawn first - called a headland, then work up and down being careful to match in the fertiliser swaths. The product is part coloured so after a little practice, you should become good at it!

Another tip is to mow the lawn first and then follow your mowing lines. Walk at your normal walking pace and if you knwo the size of your lawn and can easily calculate that you have ot applied enough then go over the lawn again at right angles as described above. How can you expect the results if you only put on half the rate of fertiliser?